Международные стандарты

НомерНаименование

Official website CEN / Search Standards
Список стандартов Standards.cen.eu – 91.100.10: Cement. Gepsun. Lime. Mortar

CEN/TC 125

CEN/TR 15124:2005 (WI=00125111)
Design, preparation and application of internal gypsum plastering systems

CEN/TC 125

CEN/TR 15125:2005 (WI=00125112)
Design, preparation and application of internal cement and/or lime plastering systems

CEN/TC 125

CEN/TR 15225:2005 (WI=00125114)
Guidance on Factory Production Control for the CE Marking (Attestation of Conformity 2+) of designed masonry mortars

CEN/TC 51

CEN/TR 15697:2008 (WI=00051092)
Cement - Performance testing for sulfate resistance - State of the art report

CEN/TC 51

CEN/TR 16142:2011 (WI=00051102)
Concrete - A study of the characteristic leaching behaviour of hardened concrete for use in the natural environment

CEN/TC 241

CEN/TR 16239:2011 (WI=00241063)
Installation rules of fibrous (gypsum) plaster works

CEN/TC 51

CR 13933:2000 (WI=00051047)
Masonry cement - Testing for workability (cohesivity)

CEN/TC 51

CR 14245:2001 (WI=00051069)
Guidelines for the application of EN 197-2 "Conformity Evaluation"

CEN/TC 125

EN 1015-10:1999 (WI=00125044)
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar

CEN/TC 125

EN 1015-10:1999/A1:2006 (WI=00125120)
Methods of test for mortar for masonry - Part 10: Determination of dry bulk density of hardened mortar

CEN/TC 125

EN 1015-11:1999 (WI=00125043)
Methods of test for mortar for masonary - Part 11: Determination of flexural and compressive strength of hardened mortar

CEN/TC 125

EN 1015-11:1999/A1:2006 (WI=00125121)
Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

CEN/TC 125

EN 1015-12:2000 (WI=00125056)
Methods of test of mortar for masonry - Part 12: Determination of adhesive strength of hardened rendering and plastering mortars on substrates

CEN/TC 125

EN 1015-17:2000 (WI=00125055)
Methods of test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars

CEN/TC 125

EN 1015-17:2000/A1:2004 (WI=00125099)
Methods or test for mortar for masonry - Part 17: Determination of water-soluble chloride content of fresh mortars

CEN/TC 125

EN 1015-18:2002 (WI=00125050)
Methods of test for mortar for masonry - Part 18: Determination of water absorption coefficient due to capillary action of hardened mortar

CEN/TC 125

EN 1015-19:1998 (WI=00125051)
Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

CEN/TC 125

EN 1015-19:1998/A1:2004 (WI=00125098)
Methods of test for mortar for masonry - Part 19: Determination of water vapour permeability of hardened rendering and plastering mortars

CEN/TC 125

EN 1015-1:1998 (WI=00125049)
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)

CEN/TC 125

EN 1015-1:1998/A1:2006 (WI=00125119)
Methods of test for mortar for masonry - Part 1: Determination of particle size distribution (by sieve analysis)

CEN/TC 125

EN 1015-21:2002 (WI=00125079)
Methods of test for mortar for masonry - Part 21: Determination of the compatibility of one-coat rendering mortars with substrates

CEN/TC 125

EN 1015-2:1998 (WI=00125059)
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars

CEN/TC 125

EN 1015-2:1998/A1:2006 (WI=00125122)
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars

CEN/TC 125

EN 1015-3:1999 (WI=00125058)
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

CEN/TC 125

EN 1015-3:1999/A1:2004 (WI=00125094)
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

CEN/TC 125

EN 1015-3:1999/A2:2006 (WI=00125123)
Methods of test for mortar for masonry - Part 3: Determination of consistence of fresh mortar (by flow table)

CEN/TC 125

EN 1015-4:1998 (WI=00125061)
Methods of test for mortar for masonry - Part 4: Determination of consistence of fresh mortar (by plunger penetration)

CEN/TC 125

EN 1015-6:1998 (WI=00125047)
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar

CEN/TC 125

EN 1015-6:1998/A1:2006 (WI=00125124)
Methods of test for mortar for masonry - Part 6: Determination of bulk density of fresh mortar

CEN/TC 125

EN 1015-7:1998 (WI=00125048)
Methods of test for mortar for masonry - Part 7: Determination of air content of fresh mortar

CEN/TC 125

EN 1015-9:1999 (WI=00125045)
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar

CEN/TC 125

EN 1015-9:1999/A1:2006 (WI=00125125)
Methods of test for mortar for masonry - Part 9: Determination of workable life and correction time of fresh mortar

CEN/TC 67

EN 12002:2008 (WI=00067087)
Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

CEN/TC 67

EN 12003:2008 (WI=00067088)
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives

CEN/TC 67

EN 12003:2008/AC:2009 (WI=00067C05)
Adhesive for tiles - Determination of shear adhesion strength of reaction resin adhesives

CEN/TC 67

EN 12004:2007+A1:2012 (WI=00067111)
Adhesives for tiles - Requirements, evaluation of conformity, classification and designation

CEN/TC 104

EN 12192-1:2002 (WI=00104054)
Products and systems for the protection and repair of concrete structures - Granulometry analysis - Part 1: Test method for dry components of premixed mortar

CEN/TC 104

EN 12617-3:2002 (WI=00104147)
Products and systems for the protection and repair of concrete structures - Test methods - Part 3: Determination of early age linear shrinkage for structural bonding agents

CEN/TC 104

EN 12617-4:2002 (WI=00104148)
Products and systems for the protection and repair of concrete structures - Test methods - Part 4: Determination of shrinkage and expansion

CEN/TC 67

EN 12808-1:2008 (WI=00067089)
Grouts for tiles - Part 1: Determination of chemical resistance of reaction resin mortars

CEN/TC 67

EN 12808-2:2008 (WI=00067090)
Grouts for tiles - Part 2: Determination of resistance to abrasion

CEN/TC 67

EN 12808-3:2008 (WI=00067091)
Grouts for tiles - Part 3: Determination of flexural and compressive strength

CEN/TC 67

EN 12808-4:2009 (WI=00067095)
Grouts for tiles - Part 4: Determination of shrinkage

CEN/TC 67

EN 12808-4:2009/AC:2011 (WI=00067C08)
Grouts for tiles - Part 4: Determination of shrinkage

CEN/TC 67

EN 12808-5:2008 (WI=00067092)
Grouts for tiles - Part 5: Determination of water absorption

CEN/TC 241

EN 12859:2011 (WI=00241066)
Gypsum blocks - Definitions, requirements and test methods

CEN/TC 298

EN 12878:2014 (WI=00298091)
Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test

CEN/TC 67

EN 1308:2007 (WI=00067081)
Adhesives for tiles - Determination of slip

CEN/TC 67

EN 1323:2007 (WI=00067082)
Adhesives for tiles - Concrete slabs for tests

CEN/TC 67

EN 1324:2007 (WI=00067083)
Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

CEN/TC 241

EN 13279-1:2008 (WI=00241053)
Gypsum binders and gypsum plasters - Part 1: Definitions and requirements

CEN/TC 241

EN 13279-2:2014 (WI=00241071)
Gypsum binders and gypsum plasters - Part 2: Test methods

CEN/TC 303

EN 13318:2000 (WI=00303001)
Screed material and floor screeds - Definitions

CEN/TC 104

EN 13395-1:2002 (WI=00104088)
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 1: Test for flow of thixotropic mortars

CEN/TC 104

EN 13395-2:2002 (WI=00104169)
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 2: Test for flow of grout or mortar

CEN/TC 104

EN 13395-4:2002 (WI=00104171)
Products and systems for the protection and repair of concrete structures - Test methods - Determination of workability - Part 4: Application of repair mortar overhead

CEN/TC 241

EN 13454-1:2004 (WI=00241003)
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 1: Definitions and requirements

CEN/TC 241

EN 13454-2:2003+A1:2007 (WI=00241052)
Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate - Part 2: Test methods

CEN/TC 67

EN 1346:2007 (WI=00067084)
Adhesives for tiles - Determination of open time

CEN/TC 67

EN 1348:2007 (WI=00067086)
Adhesives for tiles - Determination of tensile adhesion strength for cementitious adhesives

CEN/TC 51

EN 13639:2002 (WI=00051065)
Determination of total organic carbon in limestone

CEN/TC 51

EN 13639:2002/AC:2004 (WI=00051C10)
Determination of total organic carbon in limestone

CEN/TC 241

EN 13658-1:2005 (WI=00241005)
Metal lath and beads - Definitions, requirements and test methods - Part 1: Internal plastering

CEN/TC 241

EN 13658-2:2005 (WI=00241006)
Metal lath and beads - Definitions, requirements and test methods - Part 2: External rendering

CEN/TC 303

EN 13813:2002 (WI=00303018)
Screed material and floor screeds - Screed material - Properties and requirements

CEN/TC 241

EN 13815:2006 (WI=00241022)
Fibrous gypsum plaster casts - Definitions, requirements and test methods

CEN/TC 67

EN 13888:2009 (WI=00067093)
Grout for tiles - Requirements, evaluation of conformity, classification and designation

CEN/TC 303

EN 13892-1:2002 (WI=00303006)
Methods of test for screed materials - Part 1: Sampling, making and curing specimens for test

CEN/TC 303

EN 13892-2:2002 (WI=00303007)
Methods of test for screed materials - Part 2: Determination of flexural and compressive strength

CEN/TC 303

EN 13892-3:2004 (WI=00303008)
Methods of test for screed materials - Part 3: Determination of wear resistance-Bцhme

CEN/TC 303

EN 13892-4:2002 (WI=00303015)
Methods of test for screed materials - Part 4: Determination of wear resistance-BCA

CEN/TC 303

EN 13892-5:2003 (WI=00303023)
Methods of test for screed materials - Part 5: Determination of wear resistance to rolling wheel of screed material for wearing layer

CEN/TC 303

EN 13892-6:2002 (WI=00303009)
Methods of test for screed materials - Part 6: Determination of surface hardness

CEN/TC 303

EN 13892-7:2003 (WI=00303022)
Methods of test for screed materials - Part 7: Determination of wear resistance to rolling wheel of screed material with floor coverings

CEN/TC 303

EN 13892-8:2002 (WI=00303013)
Methods of test for screed materials - Part 8: Determination of bond strength

CEN/TC 125

EN 13914-1:2005 (WI=00125072)
Design, preparation and application of external rendering and internal plastering - External rendering

CEN/TC 125

EN 13914-2:2005 (WI=00125073)
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering

CEN/TC 241

EN 13915:2007 (WI=00241046)
Prefabricated gypsum plasterboard panels with a cellular paperboard core - Definitions, requirements and test methods

CEN/TC 241

EN 13950:2005 (WI=00241014)
Gypsum plasterboard thermal/acoustic insulation composite panels - Definitions, requirements and test methods

CEN/TC 241

EN 13950:2014 (WI=00241067)
Gypsum board thermal/acoustic insulation composite panels - Definitions, requirements and test methods

CEN/TC 241

EN 13963:2005 (WI=00241008)
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

CEN/TC 241

EN 13963:2005/AC:2006 (WI=00241C03)
Jointing materials for gypsum plasterboards - Definitions, requirements and test methods

CEN/TC 241

EN 13963:2014 (WI=00241070)
Jointing materials for gypsum boards - Definitions, requirements and test methods

CEN/TC 104

EN 14117:2004 (WI=00104206)
Products systems for the protection and repair of concrete structures - Test methods - Determination of time of efflux of cementitious injection products

CEN/TC 241

EN 14190:2005 (WI=00241035)
Gypsum plasterboard products from reprocessing - Definitions, requirements and test methods

CEN/TC 241

EN 14190:2014 (WI=00241068)
Gypsum board products from reprocessing - Definitions, requirements and test methods

CEN/TC 241

EN 14195:2005 (WI=00241011)
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods

CEN/TC 241

EN 14195:2005/AC:2006 (WI=00241C02)
Metal framing components for gypsum plasterboard systems - Definitions, requirements and test methods

CEN/TC 241

EN 14209:2005 (WI=00241012)
Preformed plasterboard cornices - Definitions, requirements and test methods

CEN/TC 51

EN 14216:2004 (WI=00051073)
Cement - Composition, specifications and conformity criteria for very low heat special cements

CEN/TC 241

EN 14246:2006 (WI=00241036)
Gypsum elements for suspended ceilings - Definitions, requirements and test methods

CEN/TC 241

EN 14246:2006/AC:2007 (WI=00241C04)
Gypsum elements for suspended ceilings - Definitions, requirements and test methods

CEN/TC 241

EN 14353:2007+A1:2010 (WI=00241064)
Metal beads and feature profiles for use with gypsum plasterboards - Definitions, requirements and test methods

CEN/TC 241

EN 14496:2005 (WI=00241015)
Gypsum based adhesives for thermal/acoustic insulation composite panels and plasterboards - Definitions, requirements and test methods

CEN/TC 241

EN 14566:2008+A1:2009 (WI=00241059)
Mechanical fasteners for gypsum plasterboard systems - Definitions, requirements and test methods

CEN/TC 51

EN 14647:2005 (WI=00051031)
Calcium aluminate cement - Composition, specifications and conformity criteria

CEN/TC 51

EN 14647:2005/AC:2006 (WI=00051C11)
Calcium aluminate cement - Composition, specifications and conformity criteria

CEN/TC 164

EN 14944-3:2007 (WI=00164338)
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementititous products

CEN/TC 241

EN 15283-1:2008+A1:2009 (WI=00241060)
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 1: Gypsum boards with mat reinforcement

CEN/TC 241

EN 15283-2:2008+A1:2009 (WI=00241061)
Gypsum boards with fibrous reinforcement - Definitions, requirements and test methods - Part 2: Gypsum fibre boards

CEN/TC 241

EN 15318:2007 (WI=00241026)
Design and application of gypsum blocks

CEN/TC 241

EN 15319:2007 (WI=00241027)
General principles of design of fibrous (gypsum) plaster works

CEN/TC 51

EN 15368:2008+A1:2010 (WI=00051103)
Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria

CEN/TC 51

EN 15743:2010 (WI=00051078)
Supersulfated cement - Composition, specifications and conformity criteria

CEN/TC 51

EN 15743:2010/FprA1 (WI=00051118)
Supersulfated cement - Composition, specifications and conformity criteria

CEN/TC 125

EN 15824:2009 (WI=00125131)
Specifications for external renders and internal plasters based on organic binders

CEN/TC 51

EN 196-1:2005 (WI=00051051)
Methods of testing cement - Part 1: Determination of strength

CEN/TC 51

EN 196-2:2013 (WI=00051115)
Method of testing cement - Part 2: Chemical analysis of cement

CEN/TC 51

EN 196-3:2005+A1:2008 (WI=00051095)
Methods of testing cement - Part 3: Determination of setting times and soundness

CEN/TC 51

EN 196-5:2011 (WI=00051105)
Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement

CEN/TC 51

EN 196-6:2010 (WI=00051090)
Methods of testing cement - Part 6: Determination of fineness

CEN/TC 51

EN 196-7:2007 (WI=00051091)
Methods of testing cement - Part 7: Methods of taking and preparing samples of cement

CEN/TC 51

EN 196-8:2010 (WI=00051100)
Methods of testing cement - Part 8: Heat of hydration - Solution method

CEN/TC 51

EN 196-9:2010 (WI=00051101)
Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method

CEN/TC 51

EN 197-1:2011 (WI=00051077)
Cement - Part 1: Composition, specifications and conformity criteria for common cements

CEN/TC 51

EN 197-2:2014 (WI=00051108)
Cement - Part 2: Conformity evaluation

CEN/TC 51

EN 413-1:2011 (WI=00051104)
Masonry cement - Part 1: Composition, specifications and conformity criteria

CEN/TC 51

EN 413-2:2005 (WI=00051067)
Masonry cement - Part 2: Test methods

CEN/TC 51

EN 459-1:2010 (WI=00051084)
Building lime - Part 1: Definitions, specifications and conformity criteria

CEN/TC 51

EN 459-2:2010 (WI=00051085)
Building lime - Part 2: Test methods

CEN/TC 51

EN 459-3:2011 (WI=00051086)
Building lime - Part 3: Conformity evaluation

CEN/TC 104

EN 480-12:2005 (WI=00104239)
Admixtures for concrete, mortar and grout - Test methods - Part 12: Determination of the alkali content of admixtures

CEN/TC 104

EN 480-13:2009+A1:2011 (WI=00104332)
Admixtures for concrete, mortar and grout - Test methods - Part 13: Reference masonry mortar for testing mortar admixtures

CEN/TC 104

EN 480-1:2006+A1:2011 (WI=00104331)
Admixtures for concrete, mortar and grout - Test methods - Part 1: Reference concrete and reference mortar for testing

CEN/TC 104

EN 480-5:2005 (WI=00104235)
Admixtures for concrete, mortar and grout - Test methods - Part 5: Determination of capillary absorption

CEN/TC 104

EN 480-6:2005 (WI=00104236)
Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis

CEN/TC 241

EN 520:2004+A1:2009 (WI=00241062)
Gypsum plasterboards - Definitions, requirements and test methods

CEN/TC 104

EN 934-3:2009+A1:2012 (WI=00104347)
Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling

CEN/TC 104

EN 934-5:2007 (WI=00104139)
Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling

CEN/TC 104

EN 934-6:2001 (WI=00104201)
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity

CEN/TC 104

EN 934-6:2001/A1:2005 (WI=00104245)
Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity

CEN/TC 125

EN 998-1:2010 (WI=00125141)
Specification for mortar for masonry - Part 1: Rendering and plastering mortar

CEN/TC 125

EN 998-2:2010 (WI=00125142)
Specification for mortar for masonry - Part 2: Masonry mortar

CEN/TC 12

EN ISO 10426-1:2009 (WI=00012224)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2009)

CEN/TC 12

EN ISO 10426-1:2009/AC:2010 (WI=00012C36)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification - Technical Corrigendum 1 (ISO 10426-1:2009/Cor 1:2010)

CEN/TC 12

EN ISO 10426-1:2009/prAC (WI=00012C40)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 1: Specification (ISO 10426-1:2009)

CEN/TC 12

EN ISO 10426-2:2003 (WI=00012065)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003)

CEN/TC 12

EN ISO 10426-2:2003/A1:2005 (WI=00012175)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements - Amendment 1: Water-wetting capability testing (ISO 10426-2:2003/A1:2005)

CEN/TC 12

EN ISO 10426-2:2003/AC:2007 (WI=00012C17)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO 10426-2:2003/Cor 1:2006)

CEN/TC 12

EN ISO 10426-3:2004 (WI=00012143)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 3: Testing of deepwater well cement formulations (ISO 10426-3:2003)

CEN/TC 12

EN ISO 10426-4:2004 (WI=00012148)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure (ISO 10426-4:2004)

CEN/TC 12

EN ISO 10426-5:2005 (WI=00012164)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure (ISO 10426-5:2004)

CEN/TC 12

EN ISO 10426-6:2008 (WI=00012206)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 6: Methods for determining the static gel strength of cement formulations (ISO 10426-6:2008)

CEN/TC 51

FprCEN/TR 14245 (WI=00051124)
Cement - Guidelines for the application of EN 197-2 Conformity Evaluation

CEN/TC 51

FprCEN/TR 16632 (WI=00051114)
Isothermal Conduction Calorimetry (ICC) for the determination of heat of hydration of cement: State of Art Report and Recommendations

CEN/TC 303

FprEN 13892-3 (WI=00303024)
Methods of test for screed materials - Part 3: Determination of wear resistance - Bцhme

CEN/TC 241

FprEN 14195 (WI=00241069)
Metal framing components for gypsum board systems - Definitions, requirements and test methods

CEN/TC 51

FprEN 14216 (WI=00051110)
Cement - Composition, specifications and conformity criteria for very low heat special cements

CEN/TC 51

FprEN 459-1 (WI=00051119)
Building lime - Part 1: Definitions, specifications and conformity criteria

CEN/TC 51

FprEN 459-3 (WI=00051126)
Building lime - Part 3: Conformity evaluation

CEN/TC 104

FprEN 480-1 (WI=00104355)
Admixtures for concrete, mortar and grout — Test methods — Part 1: Reference concrete and reference mortar for testing

CEN/TC 125

prEN 13914-1 (WI=00125166)
Design, preparation and application of external rendering and internal plastering - Part 1: External rendering

CEN/TC 125

prEN 13914-2 (WI=00125167)
Design, preparation and application of external rendering and internal plastering - Part 2: Design considerations and essential principles for internal plastering

CEN/TC 164

prEN 14944-3 rev (WI=00164565)
Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products

CEN/TC 125

prEN 15824 rev (WI=00125175)
Specifications for external renders and internal plasters based on organic binders

CEN/TC 346

prEN 16572 (WI=00346024)
Conservation of Cultural Heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage

CEN/TC 51

prEN 197-1 rev (WI=00051125)
Cement - Part 1: Composition, specifications and conformity criteria for common cements

CEN/TC 125

prEN 998-1 rev (WI=00125158)
Specification for mortar for masonry - Part 1: Rendering and plastering mortar

CEN/TC 125

prEN 998-2 rev (WI=00125156)
Specification for mortar for masonry - Part 2: Masonry mortar

CEN/TC 12

prEN ISO 10426-2 (WI=00012225)
Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO/DIS 10426-2:2010)

CEN/TC 51

prEN ISO 29581-2 (WI=00051083)
Methods of testing cement - Chemical analysis of cement - Part 2: Analysis by X-ray fluorescence (ISO/DIS 29581-2:2007)

Список стандартов ISO - ICS 91.100.10: Cement. Gypsum. Lime. Mortar

Standard and/or project

Stage

TC

ISO 679:2009

Cement -- Test methods -- Determination of strength

90.20

ISO/TC 74

ISO 863:2008

Cement -- Test methods -- Pozzolanicity test for pozzolanic cements

90.60

ISO/TC 74

ISO 9597:2008

Cement -- Test methods -- Determination of setting time and soundness

90.60

ISO/TC 74

ISO 10426-1:2009

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 1: Specification

60.60

ISO/TC 67/SC 3

ISO 10426-1:2009/Cor 1:2010

 

60.60

ISO/TC 67/SC 3

ISO 10426-1:2009/Cor 2:2012

 

60.60

ISO/TC 67/SC 3

ISO 10426-2:2003

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 2: Testing of well cements

90.92

ISO/TC 67/SC 3

ISO 10426-2:2003/Cor 1:2006

 

60.60

ISO/TC 67/SC 3

ISO 10426-2:2003/Amd 1:2005

Water-wetting capability testing

60.60

ISO/TC 67/SC 3

ISO 10426-3:2003

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

90.20

ISO/TC 67/SC 3

ISO 10426-4:2004

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 4: Preparation and testing of foamed cement slurries at atmospheric pressure

90.93

ISO/TC 67/SC 3

ISO 10426-5:2004

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 5: Determination of shrinkage and expansion of well cement formulations at atmospheric pressure

90.93

ISO/TC 67/SC 3

ISO 10426-6:2008

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 6: Methods for determining the static gel strength of cement formulations

90.93

ISO/TC 67/SC 3

ISO/TR 12389:2009

Methods of testing cement -- Report of a test programme -- Chemical analysis by x-ray fluorescence

60.60

ISO/TC 74

ISO 13007-3:2010

Ceramic tiles -- Grouts and adhesives -- Part 3: Terms, definitions and specifications for grouts

90.93

ISO/TC 189

ISO 13007-4:2013

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts

60.60

ISO/TC 189

ISO 29581-1:2009

Cement -- Test methods -- Part 1: Analysis by wet chemistry

90.20

ISO/TC 74

ISO 29581-2:2010

Cement -- Test methods -- Part 2: Chemical analysis by X-ray fluorescence

60.60

ISO/TC 74

ISO 29582-1:2009

Methods of testing cement -- Determination of the heat of hydration -- Part 1: Solution method

60.60

ISO/TC 74

ISO 29582-2:2009

Methods of testing cement -- Determination of the heat of hydration -- Part 2: Semi-adiabatic method

60.60

ISO/TC 74